Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
Place of Origin: | China |
---|---|
Brand Name: | OUQI |
Certification: | ISO9001:2008 ISO14001:2004 |
Model Number: | Endmills blanks |
Minimum Order Quantity: | 10pc |
Price: | negotiable |
Packaging Details: | plastic box/box + Cartons |
Delivery Time: | Standard products in one week |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 5000kgs per month |
Material: | 10% Cobalt | ISO Grade: | K30 |
---|---|---|---|
Diameter: | 8mm | Leght: | 100mm |
Tolerance: | H6/h5 | Surface Roughness: | Ra 0.2 |
Circularity: | 0.02 | Straightness: | 0.02 |
Density: | 14.50 | Hardness HV30: | 91.8 |
T.R.S: | 3800 | Grain Size: | 0.8 |
High Light: | Aluminum Alloy Cemented Carbide Milling Blanks,K1C 10.5 Cemented Carbide Milling Blanks,10% Cobalt Carbide Cutting Rod |
K1C 10.5 Cemented carbide milling blanks for cutting aluminum alloy with long service life
OD: 8mm -0.006
Length: 100mm +0.5
One end with chamfer.
ISO | Grain size | Cobalt | Density | Hardness | T.R.S | k1C |
Code | μm | % | g/cm3 | HRA | N/mm2 | Mpa.m1/2 |
K40 | 0.8 | 10 | 14.45 | 91.8 | 3800 | 10.5 |
Application: Sub-fine grain size, processing by medium speed, good general performance, drill bits and end mills are recommended, suitable for cutting ordinary alloy steel, aluminum alloy, heat resistant alloy, cast iron etc.
Diameter mm | Length mm | Diameter mm | Length mm | |||||
D | Tolerance | L | Tolerance | D | Tolerance | L | Tolerance | |
1.60 | +0/-0.006 | 20 | 0/+0.5 | 10.00 | +0/-0.009 | 50 | 0/+0.5 | |
2.35 | 30 | 0/+0.5 | 10.00 | 70 | 0/+0.5 | |||
2.35 | 45 | 0/+0.5 | 10.00 | 72 | 0/+0.5 | |||
3.00 | 60 | 0/+0.5 | 10.00 | 75 | 0/+0.5 | |||
4.00 | +0/-0.008 | 40 | 0/+0.5 | 10.00 | 80 | 0/+0.5 | ||
4.00 | 46 | 0/+0.5 | 10.00 | 90 | 0/+0.5 | |||
4.00 | 50 | 0/+0.5 | 10.00 | 100 | 0/+0.5 | |||
4.00 | 60 | 0/+0.5 | 12.00 | +0/-0.011 | 70 | 0/+0.5 | ||
4.00 | 75 | 0/+0.5 | 12.00 | 79 | 0/+0.5 | |||
4.00 | 100 | 0/+0.5 | 12.00 | 83 | 0/+0.5 | |||
5.00 | 50 | 0/+0.5 | 12.00 | 100 | 0/+0.5 | |||
5.00 | 60 | 0/+0.5 | 12.00 | 120 | 0/+0.5 | |||
5.00 | 100 | 0/+0.5 | 13.00 | 100 | 0/+0.5 | |||
6.00 | 40 | 0/+0.5 | 14.00 | 75 | 0/+0.5 | |||
6.00 | 50 | 0/+0.5 | 14.00 | 80 | 0/+0.5 | |||
6.00 | 58 | 0/+0.5 | 14.00 | 83 | 0/+0.5 | |||
6.00 | 60 | 0/+0.5 | 14.00 | 100 | 0/+0.5 | |||
6.00 | 67 | 0/+0.5 | 16.00 | 80 | 0/+0.5 | |||
6.00 | 75 | 0/+0.5 | 16.00 | 90 | 0/+0.5 | |||
6 | 100 | 0/+0.5 | 20.00 | +0/-0.013 | 100 | 0/+0.5 | ||
8 | +0/-0.009 | 50 | 0/+0.5 | |||||
8 | 60 | 0/+0.5 | ||||||
8 | 63 | 0/+0.5 | ||||||
8 | 75 | 0/+0.5 | ||||||
8 | 90 | 0/+0.5 | ||||||
8 | 100 | 0/+0.5 |
General tolerance for the h6 finished ground solid carbide rods | ||||||||||
Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
<3.0 | -6/0 | <100.0 | +0.5/+1.0 | <4.0 | 0.07 | <3,0 | 2,0 micron | |||
3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
10.0-18.0 | -11/0 | >12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron |
General tolerance for the h5 finished ground solid carbide rods | ||||||||||
Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
<3.0 | -4/0 | <100.0 | +0.5/+1.0 | <4.0 | 0.07 | <3,0 | 2,0 micron | |||
3.0-6.0 | -5/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
6.0-1.0 | -6/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
10.0-18.0 | -8/0 | >12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
18.0-30.0 | -9/0 | 18,1- 30,0 | 4,0 micron | |||||||
30.0-50.0 | -11/0 | 30,1- 50,0 | 5,0 micron |